Spident EsCom250 NanoHybrid Composite System Kit

Cataloque:
Features: High Compressive Strength: Exhibits strong compressive strength, contributing to the durability and stability of dental restorations. Zirconia Filler for Enhanced Strength: Utilizes a zirconia filler to enhance flexural compressive strength, ensuring robust and long-lasting performance. Low Polymerization Shrinkage: Minimizes polymerization shrinkage, reducing the risk of gaps and ensuring a secure bond between the restoration and the natural tooth. Easy to Handle: Designed for easy handling, facilitating precise application and shaping during dental procedures. Excellent Shape Retention: Demonstrates an excellent ability to hold shape, providing dentists with control during application and adjustments. Natural Tooth Matching: Offers excellent matching with natural teeth, promoting seamless integration and aesthetic outcomes. Radiopaque Properties: Exhibits radiopaque properties, aiding in diagnostic imaging and ensuring visibility on X-rays. Extended Working Time: Provides a generous working time of 90 seconds, allowing for meticulous shaping and adjustments before the curing process.
Key Specifications: Working Time: (90 seconds) Storage: Store at a temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture.
Packaging: Spident EsCom250 NanoHybrid Composite System Kit: 5 x Syringe 4g (A1,A2,A3,A3.5,B2) 1 x FineEtch Etchant (5ml) 4 x Etchant Tips 1 x Es Bond Bonding Agent (5ml) 1 x Microbrush Handle 30 x Microbrush Tips 1 x Dispensing Dish
Direction to Use: Pretreatment: Clean the tooth using a non-fluoride polishing paste. Select the shade using a Vita® shade guide while the tooth is still moist. Cavity Preparation: Prepare the cavity minimally as required for adhesive techniques. Bevel all enamel margins in the anterior region. Avoid beveling margins in the posterior region and slice preparations. Clean the cavity by spraying it with water, removing all debris, and drying it. Isolate the cavity, preferably using a rubber dam. Approximal Contact Areas: Place a transparent matrix and fix it in place when filling cavities with approximal sections. Etch: Apply Etching Gel first to the enamel areas of the cavity for 30 seconds. Fill the entire cavity (dentine) with Etching Gel for an additional 15 seconds. Rinse the cavity thoroughly with a water spray and dry it with oil-free compressed air. Bond: Apply 2-3 consecutive coats of Bond to etched enamel and dentin for 15 seconds each. Gently air thin for five seconds to evaporate solvents. Light cure for 10 seconds. Composite Filling: Extrude the required amount of NanoHybrid Composite from the screw syringe and place it in the cavity. Contour the composite. Ensure layers are not thicker than 2 mm. Curing: Light cure all shades for 40 seconds per layer using a light curing unit. Hold the light guide as close as possible to the surface of the filling. Trimming: Trim and polish NanoHybrid Composite immediately after curing using finishing diamonds, flexible disks, silicone polishers, and polishing brushes. Check the occlusion and articulation and spot grind if necessary. Final Finish: Apply polishing paste on the cup/brush, directly over the tooth, or on the restoration material. Use low rotation and low pressure with intermittent touches and circular movements for polishing.
Additional Info: No additional info provided
Warranty: Warranty is not applicable for this product.