Woodpecker O-Star Wide-Spectrum Curing Light

Brochure:
Features: Turbo mode from 1 second Integrated spectrometerUniform and collimated beam Optimally collimated beam output, effectively reduce the optical loss. Light source design providing excellent intra-oral access. Constant light intensity. The solidification effect is not affected by the consumption of remaining power. Charging base with integrated radiometer.
Key Specifications: Technical Specification: Size of main uint: 23mm×23mm×204mm Net weight of main unit: 108g Applied parts of the equipment: Top of main unit, Point cure lens Duty cycle of the equipment: 20 Sec on/20 Sec off Rechargeable Lithium battery Battery model:18500 Battery capacity: 2000mAh Battery: has over-voltage Over current and short circuit protection: 3.6.3 Adapter(charge) Input: 100-240V~ 50/60Hz 0.4A Max. Output: 5.0V 1A The adapter must be complies with: IEC 60601-1 and IEC 60601-1-2.
Packaging: 1 x Maint unit 1 x Top of main unit 1 x Light hood 1 x Adapter 1 x Charging base 1 x Point cure lens 100 x Disposable sleeve 1 x Qualified certificate 1 x Instruction manual 1 x Warranty card
Direction to Use: Aim the mounting holes which on the upper of main unit, and make the long side of the top of main unit inserted to it (must screw the top of main unit to the end, don’t inclined inserted). The top of main unit can rotate 360 degrees. Take out the disposable sleeve and put it on the main unit.
Additional Info: Country of Origin: PRC Manufacturer: Woodpecker
Warranty: Manufacturer/Importer warranty of 2 Year as applicable for this product. Warranty does not apply against any physical damage to the product. Service and Warranty are handled by the manufacturer/importer directly for this product Teethment will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer Teethment and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer’s warranties only Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Teethment may assist the customer in registering a request to get the Product replaced or serviced. The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be. Please click here to know about our return policy & how warranty is covered at Teethment