Woodpecker Implanter Physiodispenser Fiber Optic

Features: Intuitive user interface Motor with precision and strength Strong & stable contra-angle Flexible multi-function foot pedal Color touch screen with glass surface Mute peristaltic pump Perfect balance
Key Specifications: Rotation Speed Range - 300 - 40000rpm Torque Range/Gear 20:1 - 5N.cm- 80Ncm Max Pump Output - 110ml/min Main Unit Dimensions - φ23.4mm*L91mm Motor Weight - 140g Power Supply - Ac220v 50/60Hz Device for intermittent operation: 3 min ON,10 min OFF Power supply voltage: 200-240V~ Power supply frequency: 50/60Hz Software version: Implant-V1 Input power: 150VA Fuses: 2×T1.6AL 250V Applied parts: Contra-angle handpiece Maximum Temperature: 41.8℃ Maximum water volume: 135ml/min Dimension: 276mm*267mm*110mm Environment temperature: +5~40℃ Relative humidity: 30%~75% Atmosphere pressure:70kPa~106kPa Device case material: PC+ABS Handpiece material: brass Storage: Store in a clean, dry, ventilated, non-corrosive atmosphere with a relative humidity of 10% to 93%, an atmospheric pressure of 70KPa to 106KPa, and a temperature of -20 °C to +55 °C;
Packaging: 1 x Physiodispenser 1 x Handpiece 1 x Foot Pedal with cable 1 x Handpiece Stand
Direction to Use: Preparation: Ensure that the device is connected to a grounded electrical outlet. Verify that the cabling system meets the appropriate standards and requirements. Check that all accessories and components are properly assembled and in good working condition. Inspect the handpiece and cables for any signs of damage or wear. Power On: Turn on the power supply to the Implanter Optic. The device will initiate the start-up process, and the color touch screen will display the main interface. Setting Parameters: Navigate the menu options on the touch screen using the intuitive user interface. Adjust the necessary parameters for the specific implant surgery, such as speed and torque settings, using the preset values or manual input. Ensure that the parameters are appropriate for the patient and the specific dental implant procedure being performed. Patient Preparation: Follow standard protocols for patient preparation, including proper disinfection and sterilization techniques. Position the patient comfortably in the dental chair, ensuring proper access to the treatment area. Operating the Implanter Optic: Hold the contra-angle handpiece securely and place it in the patient's mouth. Activate the foot pedal to initiate the operation. Monitor the device's performance on the touchscreen display, ensuring that the parameters remain within the desired range. Follow the recommended operating times and intervals to prevent overheating or system malfunction. Cleaning and Maintenance: After each use, power off the Implanter Optic and disconnect it from the power supply. Clean and disinfect the handpiece and other reusable components according to the manufacturer's instructions. Wipe the control panel and touch the screen with a damp cloth, avoiding any corrosive solutions. Store the device in a clean, dry, and well-ventilated area, following the recommended storage conditions.
Additional Info: Country of Origin: PRC Manufacturer: Woodpecker
Warranty: Manufacturer/Importer warranty of 1 Year against manufacturing defect Service and Warranty are handled by the manufacturer/importer directly for this product Teethment will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer Teethment and the Buyer acknowledge that the Products purchased/used are a subject matter of the original Manufacturer/Importer’s warranties only Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Teethment may assist the customer in registering a request to get the Product replaced or serviced. The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or does not tamper as the case may be.