Being Foshan Straight Handpiece

Features: External cooling system Compact design Reliable Easy to use Light weight
Key Specifications: Technical Features:- Description:- E type low-speed handpiece，1:1 Ratio, with external cooling system Air pressure:- 245~392Kpa (2.5~4.0 kgf/cm2) Water Pressure:- 198Kpa (2 kg) Rotation Speed:- 22,000~27,000 rpm Bur Applicable:- Φ2.334~2.355 mm Noise:- ≤70dB
Packaging: 1 x Straight Handpiece
Direction to Use: Preparation: Ensure that the handpiece is properly sterilized. Confirm that the bur (dental drill) is securely attached to the handpiece. Connect to Dental Unit: Connect the handpiece to the dental unit's air and water supply as per the unit's specifications. Adjust Air and Water Pressure: Set the air and water pressure to the recommended levels specified in the handpiece's technical features (typically 245-392 Kpa for air and 198 Kpa for water). Bur Inspection: Before each use, inspect the bur for any damage or wear. Replace if necessary. Patient Preparation: Prepare the patient for the specific dental procedure, ensuring their comfort and safety. Handpiece Operation: Hold the handpiece in a comfortable and ergonomic grip. Activate the handpiece according to the dental unit controls. Adjust the rotation speed based on the procedure requirements (22,000-27,000 rpm for this handpiece). Procedure Execution: Perform the dental procedure with precision, using the handpiece for tasks such as trimming dentures or tooth/bone cutting. Cooling System: Monitor the external cooling system to ensure effective heat dissipation during prolonged use. Post-Procedure: After the procedure, detach the handpiece from the dental unit. Clean and sterilize the handpiece. Dispose of or sterilize the bur appropriately.
Additional Info: Country of Origin: PRC Manufacturer: Being Foshan
Warranty: 3 Months against Manufacturing Defect Physical Damage is not covered in any case Service and Warranty are handled by the manufacturer/importer directly for this product Teethment will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer Teethment and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Teethment may assist the customer in registering a request to get the Product replaced or serviced. The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.